TRIDENT™ and AUTO-BOLT™ MAX

Ultimate Loss Prevention.
Maximum Break-In Protection with Code-Compliant Door Hardware

Secure High Value Assets with Securitech

Our Forced-Entry Solutions

Maximum break-in protection against rear doors break-ins, inventory forced-entry resistance, and vandalism with Securitech’s multi-point deadbolt lock door hardware solutions without impeding life-safety & security codes.

Securitech’s Trident™ has been protecting America’s pharmaceutical and retail market for over 20 years with thousands installed across the country offering the highest level of protection against forced entry with automatic deadbolt locking each time the door closes.

Applications

  • Exit-Only Door
  • Low-Traffic Entry Doors

Multi-Point Deadbolt Protection Against Break-Ins

  • Four standard locking pry-resistant bolts, located at door’s weak points
  • Three horizontal locking points on lock side and one bolt on the hinge side
  • Bolts project 1” into the frame
  • All moving parts are protected;
  • Stainless steel 1-1/4” long primary deadbolt
    • Three horizontal locking points on lock side and one bolt on hinge side
    • 5/8” diameter 7” long auxiliary bolts, free-spinning to resist saw cutting
    • Thru-bolted, stainless-steel anti-pry plate
    • No bolts in the floor; free of potential jamming

Complete Code Compliance

  • Single motion retracts ALL bolts simultaneously for immediate egress
  • ADA-Compliant Exterior Lever options available

Easy Installation

  • Retrofit to existing doors or new installation
  • Revolutionary product design; installation in under 2 hours
  • Full size steel template; mark and drill without measuring
  • Lock is factory assembled; modules connected to main lock body
  • Door survey not required before ordering; non-handed, non-sized (handing needed for exterior trim)

More Features and Options Than Any Other Multipoint Lock

Add additional options and features to an existing Trident™

  • Delayed Egress
  • Exterior Levers; key or electric release to tie into access control systems or remote release option available on all models
    • Vandal-resistant lever with resettable, breakaway slip-clutch (on TEL-MD-KLT-AP models)
    • ADA Compliant
  • Exit alarms; captive key in alarm models, removable only when armed
    • Trident™ alarms are all wall mounted and snap into the lock via a stainless steel armored cable.
    • Alarms feature twin 95 db piezo alarms and are reset by key (mortise cylinder required).
    • Selectable last door out feature available
    • Choices include: 9volt battery, 110v direct power, signal only (alarm by others), digital counter,
      or no alarm.
  • Door Strengthening Reinforcement kit
  • Double door applications

Certifications

  • Fire Rated Models are listed as Fire Exit Hardware for 3 hrs per UL10C, UBC 7-2 and NFPA 252
  • Compliant with Exit Lock and Exit Device
  • Miami-Dade Component Approval rated +/-100 PSF Design Pressure and Large Missile Impact
  • FBC Statewide Approval FL14075 for High Velocity Hurricane Zones, Includes Large Missile Impact
    Resistance and Design Pressure +/-100PSF

Designed for high-traffic entrances used by staff and the public alike, storage room and other doors. Maximum protection against break-ins is provided with simple low‐pressure movement to unlock. It is fully compatible with standard, high‐security and restricted key systems (mortise cylinder). The optional electric release integrates with all access control systems. Additional models, signaling, functions and options are available.

High Traffic Door Applications

  • Main Entrance Doors
  • Employee Entrances
  • Clinic Entrances
  • Secure Rooms
  • Data Centers & More

Instant Deadbolt Protection Against Break-Ins

  • Instant deadbolt locking each time the door closes
  • Stainless steel deadbolts project 1 inch
  • The door is bolted to the frame; three positions on the lock edge, and one on the hinge edge
  • Stainless steel thru-bolt plates enhance forced-entry resistance
  • No bolt projects into the saddle, reducing maintenance requirements and ensuring durability

Complete Code Compliance

  • Turning interior lever seamlessly retracts all three bolts simultaneously.
  • Meets ADA requirements for single motion exiting and unobstructed botton of door surface
  • Easy one-motion entry by key or via access control system (on electric models)

Easy Installation

  • Ideal for retrofit or new construction
  • Internal or stainless steel surface-housing models
  • Inswing & outswing models available

Full Access Control Integration Available

  • Electrical Release
  • Request-To-Exit Signal
  • Door Position Switch
  • Bolt Position Switch
  • Key Usage Switch

Durability

  • Tested for over 1 million cycles
  • Stainless steel lock body and internal parts
  • Lower bolt projects into the frame, eliminating hole in the floor

Certifications

Fire Rated Models Available:

    • Maximum opening size 4’0”x8’0” for single and 8’0”x8’0” for double doors
    • Category C (up to 3 Hrs)
      Applicable Standards:
    • UL10(c) (2015) Standard for Positive Pressure Fire Tests of Door Assemblies
    • CAN-ULC-S104-15 (2015) Standard Methods of Fire Tests of Door Assemblies
    • NFPA 252 (2017): Standard Methods of Fire Tests of Door Assemblies

Tornado and Hurricane Safe Room Applications Available for Concealed Models:

    • Size Limitations (subject to change): Minimum 2’6”x 6’8”; Maximum 4’0” x 10’0” Applicable Standards:
    • FEMA P-361, Third Edition / March 2015, Safe Rooms for Tornadoes and Hurricanes, Guidance for
      Community and Residential Safe Rooms
    • ICC 500-2014, ICC/NSSA Standard for the Design and Construction of Storm Shelters

Retail Locking Solutions

Securitech works closely with clients to find high-security locking solutions that suit their needs. Securitech is experienced with a variety of retail facilities, troubled locations with high-asset valuables, recently vandalized retail facilities, worried owners, government and municipality facilities, infrastructure, and more.

Request More Information